Masonry Contractor in Savannah, GA

Solid Foundation Repair Of Savannah provides structural and repair masonry for homes and businesses across Savannah and coastal Georgia — block, brick, and stone work built to withstand the region’s moisture, salt air, and soil movement.

Our Masonry Services

Cracked or bowing masonry often traces back to the foundation. We also provide foundation repair and retaining wall repair.

The Full Range of Masonry Work in Savannah, GA

Masonry is one of the oldest building trades in coastal Georgia, and
Savannah’s homes, garden walls, chimneys, and commercial storefronts depend on
it for both strength and appearance. A qualified masonry contractor works
across three overlapping categories: structural masonry that carries load,
repair and restoration that stabilizes aging brick and block, and moisture
management that keeps water from destroying the wall from the inside out.
Solid Foundation Repair Of Savannah has served this region since 1989, and our
masonry work spans everything a Savannah property owner is likely to need.

• Brick, block, and stone construction — new walls, piers,
  columns, steps, and retaining walls built to carry structural loads.
• Chimney and fireplace masonry — rebuilds, crown repair, and
  crack sealing on units exposed to weather and heat cycling.
• Tuckpointing and repointing — cutting out failed mortar
  joints and replacing them to restore weather resistance and load transfer.
• Stucco and parging — coating and recoating masonry
  surfaces, including moisture-tolerant systems suited to the coast.
• Brick and block repair — replacing spalled, cracked, or
  displaced units and re-anchoring bulging walls.

Why Savannah’s Historic and Coastal Setting Changes the Job

Savannah sits on the Georgia coast in a high-humidity, salt-laden environment,
and that climate is hard on masonry. Marine air and seawater contact introduce
soluble salts into porous brick and mortar. As moisture moves through the wall
and evaporates at the surface, it leaves behind the white powdery deposits
known as efflorescence. Left unaddressed, that same salt and moisture cycle
weakens the masonry’s mass over time and leads to spalling — where the brick
face chips, flakes, or breaks away, exposing the softer interior to even more
water. On the coast, the fix is rarely cosmetic. Effective masonry repair here
means finding and stopping the water source: failing mortar joints, poor
drainage, missing flashing, or downspouts dumping against the wall. Where
masonry problems meet settlement or moving footings, the work overlaps with
foundation repair, and
both need to be diagnosed together rather than in isolation.

Tuckpointing, Repointing, and Historic Brick in Savannah

Much of Savannah’s most valuable masonry is old, soft, hand-made brick that
predates modern hard mortars. On these walls, mortar choice is not a detail —
it is the whole job. The Secretary of the Interior’s Standards and the
National Park Service’s Preservation Brief 2 direct that repointing mortar be
softer and more permeable than the surrounding brick, which is why lime-based
mortar is specified for historic masonry rather than hard Portland-cement
mixes. A mortar that is harder than the brick forces stress and moisture into
the brick face instead of the joint, accelerating spalling and permanent
damage. Good repointing on a historic Savannah building involves:

• Matching the new mortar’s strength, color, and joint profile to the
  original.
• Removing deteriorated mortar without damaging the brick edges (or
  “arrises”).
• Using breathable, lime-based mortar so moisture escapes through joints
  rather than through the brick.
• Correcting the underlying moisture problem so the repair actually lasts.

Certificates of Appropriateness and Working in the Savannah Historic District

If your property sits within the Savannah Downtown Historic District, exterior
masonry work generally requires a Certificate of Appropriateness (COA) before
it begins. The Historic District Board of Review, staffed through the
Metropolitan Planning Commission, reviews these applications, and even brick
repointing is subject to review. Applicants are typically asked to submit
photographs marking the areas to be repointed and to state the proposed mortar
mix — the proportions of cement, lime, and sand — so it complies with
Preservation Brief 2. A contractor unfamiliar with this process can stall a
project or, worse, install non-compliant materials that must be torn out. We
handle masonry across greater Savannah and coastal Georgia and structure
historic-district work around these requirements from the start. When you are
ready, you can request a free estimate and we will
walk your property before scoping the work.

How to Choose a Qualified Masonry Contractor in Coastal Georgia

Masonry that fails early almost always traces back to the wrong materials,
hidden water, or a contractor who never diagnosed the real cause. In a
coastal, historic market like Savannah, the right mason has to understand both
the engineering and the preservation side of the trade. Before you hire,
confirm the contractor:

• Is licensed and insured — Solid Foundation Repair Of Savannah has been
  licensed, insured, and serving Savannah since 1989.
• Understands lime-mortar and Preservation Brief 2 requirements for historic
  brick.
• Knows how salt, humidity, efflorescence, and spalling behave in coastal
  Georgia.
• Investigates the moisture source rather than just patching the surface.
• Can coordinate masonry with structural and foundation concerns on the same
  property.

For structural walls, chimney and brick repair, tuckpointing, or historic
repointing anywhere in the Savannah area, call
(912) 642-3890 to discuss your project with a
local masonry contractor who knows this coast.